About the CCD

With antennas, size is everything.  Bigger is always better!

The fact is, the more metal you have in the air, the better your antenna is going to work for you.  Both transmit AND receive.  A normal half wave dipole on 40 is 66′ long.  Imagine one that is 114′ or even 230′ but is still resonant across the entire band?  An 80 meter half wave dipole is 132; long.  How about one that is 230′ long instead, but still resonant and usually under 2:1 across the entire band?  That’s what is so special about our antennas.  More antenna, yet still resonant so there’s no tuner needed.

Through some intensive modeling and testing we’ve found that perfect set of designs to give you two bands on each antenna and both are at least double or triple the length of a dipole for the same bands.

Bigger is better!

If you are looking for:

  • A wire antenna with about 3db+ gain over a half wave dipole
  • An antenna that is markedly quieter on receive…generally as quiet as a loop or better
  • Something you can mount up high, close to the ground, or even laying ON the ground!!
  • It doesn’t compromise by working marginally on all bands – it works exceptionally well on theband(s) it’s designed for.
  • Handles static discharges as needed all along the antenna in lightning and sand storms.  (You should still disconnect all antennas in lightning storms however…and before, not during!)
  • Can handle 800 watts on the band(s) it’s designed for. (note: if installing it along eaves or fence lines power should be lowered to safe exposure levels)  Many have run more power, however, we suggest keeping it around or below this power level.  This really depends on your grounding system.  People with well grounded stations run more power without a problem.  The computer model, and actual use, shows they can easily handle 1.5KW.

For those of you who want to know how and why it works on a technical level please visit AD7MD’s web site and get the full scoop.  He’s always happy to answer questions too.

The CCD antenna is like nothing else on the market.  And it just might be that bit of magic you’ve been looking for.

CCD means Controlled Current Distribution.  This is a full wave dipole (or can be a long wire style) that has a series of capacitors mounted along the wire on specially designed boards.  The capacitors allow us to have a impedance that is able to be matched to ladder line or baluns while having an antenna about twice as long as a standard half wave dipole.  

“The bottom line is it works very well, and the reception is great! I made a contact with England, right after I put it up! – Scotty, KE7NCO”

Q: What is it?
A: It’s a full-wave dipole that has anywhere from 22 to 28 capacitors evenly spaced along the wire.

Q: What does ‘controlled current distribution’ mean?
A: The name is misleading because it’s not really about current.  It’s about bringing a full-wave antenna to an impedance that can be matched with our various feel line limitations of 50-600 ohms.

Q: What else does the antenna do other than put more wire in the air for me?
A: Let’s see, there are a lot of interesting properties of the CCD…

  • It is very quiet because of the caps keeping static on the wire down.  About as quiet as a loop generally.
  • It doesn’t interact with metal or ground around it as much.  Run it close to a chain-link fence or flag pole and see little change in resonance.  The transmission pattern may change a bit.  This is a perfect LARGE antenna that can be put under eaves, along with block fences, and other places to avoid the HOA Gestapo. Note that a tuner would probably be required if it’s mounted right against something.

Q: What bands are available?
A: After a LOT of research we’ve found there are some bands that just don’t make sense to use CCD technology on.  For example, if someone has room for a 160 meter CCD they have room for a 160 meter loop and on that band a loop works really well.  Loops fight noise as well as a CCD does.

Q: Can I use it on other bands?
A: Sure.  With a tuner.  But, receive is a very important advantage to a CCD and it receives far better on the band(s) it is designed for.  To really do multi-band well we suggest you use ladder line feed.  We do sell these antennas without the balun and you provide the center insulator and feed line.

Q: Can I feed several CCDs with the same coax? (assuming no remote antenna switch – those work okay)
A: Nope.  CCDs are not the harmonic animals that halfwave dipoles are.  Anyone band on a CCD might be relatively resonant on another band.  This is enough to mess up the match on that band even though there might be a specific element for the band.  The more you add the worse it gets.